CHROME METAL

CHROME METAL

GOST 5905-2004 (ISO 10387:1994)

   Chrome Metal is produced crushed to pieces of 5-50 mm till 90%.

Empirical formula:
   Cr.

    Used in:

  • Metallurgical industry for alloying special steel and fusion;
  • Heat-resistant alloys for aviation and space industry;
  • Corrosion-resisting alloys in chemical and atomic engineering.
Specification: X98,5 X99 X99Рќ5 X99Рќ4
Mass fraction of Cr,min 98,5% 99,0% 99,0% 99,0%
Mass fraction of Si, max 0,4% 0,2% 0,2% 0,2%
Mass fraction of Al, max 0,7% 0,5% 0,5% 0,2%
Mass fraction of Fe,max 0,6% 0,5% 0,5% 0,5%
Mass fraction of C,max 0,03% 0,03% 0,03% 0,03%
Mass fraction of S, max 0,02% 0,02% 0,02% 0,02%
Mass fraction of P, max 0,02% 0,02% 0,02% 0,02%
Mass fraction of Cu, max 0,02% 0,02% 0,01% 0,01%
Mass fraction of As, max 0,01% 0,01% 0,01% 0,01%
Mass fraction of Bi, max 0,0005% 0,0005% 0,0005% 0,0005%
Mass fraction of Sb, max 0,008% 0,008% 0,008% 0,008%
Mass fraction of Zn, max 0,01% 0,01% 0,006% 0,006%
Mass fraction of Pb, max 0,001% 0,001% 0,0008% 0,0008%
Mass fraction of Sn,max 0,004% 0,004% 0,004% 0,004%
Mass fraction of N, max - - 0,05% 0,04%
Mass fraction of Co, max - - - 0,005%
    Packing:

  • UN-approved grey welded and folded steel barrels (drums) of 500 kg net each, stacked on wooden pallets, shrink wrapped;
  • UN-approved tetraslinging banded soft containers of tunnel type of 1000 kg net each.